Two stacked Windows-only failures in FileSyncManager.sync_back:
1. The staging tar was a NamedTemporaryFile held open while the backend's
bulk_download_fn reopened the same path for writing — PermissionError on
Windows (exclusive handle). mkstemp + close + unlink in finally instead.
2. Staged member keys came from os.path.relpath and mapping parents from
Path(remote).parent — both stringify with backslashes on Windows, so no
staged file ever matched its POSIX remote key and every edit was skipped
as "no host mapping". Keys are now built with as_posix(); parents with
posixpath.dirname; the inferred host path is joined with the host's Path.
(cherry picked from commit e8cab109db, re-applied on the current file)
Follow-up for salvaged PR #39946: file_sync.py already aliases time.sleep
as _sleep specifically to avoid tests mutating the shared stdlib module
object. Apply the same convention to the rate-limit clock (_monotonic)
and point the new regression test at it.
FileSyncManager.sync() is rate-limited to once per _sync_interval via
_last_sync_time, and its docstring promises that on failure "state rolls
back so the next cycle retries everything". But the except handler also
set _last_sync_time = time.monotonic() on failure, so the next non-forced
sync() within the interval hit the rate-limit guard and returned early —
suppressing the retry the rollback had just prepared.
Because the non-forced sync() runs before every command on the SSH, Modal
and Daytona backends, a single transient upload failure (network blip,
dropped channel) left the remote with stale files for the next command
(up to _sync_interval, default 5s). Forced syncs bypass the guard, which
is why it was intermittent.
Remove the failure-path timestamp bump so the clock only advances on a
successful or no-op cycle, matching the documented contract. Add a
regression test that fails before this change and passes after.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
_sync_back_once defers a SIGINT that lands mid-sync, then re-delivers it once the
sync completes so the user's Ctrl+C isn't lost. It did so with
os.kill(os.getpid(), signal.SIGINT). That is not graceful on Windows: os.kill
only treats CTRL_C_EVENT(0)/CTRL_BREAK_EVENT(1) as console events; any other
value (SIGINT == 2) routes to TerminateProcess(sig), so a Ctrl+C during a
remote-backend (ssh/daytona/modal) sync-back hard-kills the whole CLI session
(exit code 2) on Windows instead of raising KeyboardInterrupt.
Use signal.raise_signal(signal.SIGINT) (3.8+), which invokes the restored
handler through C raise() on every platform. Verified on Windows: raise_signal
runs the handler (graceful) while os.kill(getpid, SIGINT) TerminateProcess-es
the process. Adds a cross-platform regression test that runs on Windows too (it
stubs the locked sync body, so unlike test_file_sync_back.py it needs no fcntl).
On Windows, os.symlink() raises OSError (WinError 1314) unless the
process has Administrator rights or Developer Mode is enabled. The SSH
bulk-upload staging logic used symlinks to mirror the remote layout
before piping through tar; this caused all ssh_bulk_upload tests to
fail on Windows.
- ssh.py: wrap os.symlink() in try/except OSError and fall back to
shutil.copy2() so staging works on every platform. shutil was already
imported, no new dependency introduced.
- file_sync.py: replace str(Path(remote).parent) with
posixpath.dirname(remote) in unique_parent_dirs(). pathlib.Path uses
the host separator (\ on Windows), but these paths are sent to a
remote Linux host over SSH and must always use forward slashes.
- test_ssh_bulk_upload.py: make test_staging_symlinks_mirror_remote_layout
platform-agnostic — assert file existence and content instead of
os.path.islink() + os.readlink(), since the staged entry may be a
copy on Windows.
1. trajectory_compressor.py: yaml.safe_load() returns None on empty
files, crashing with TypeError on `if 'tokenizer' in data`. Fix by
adding `or {}` fallback. (HIGH — blocks startup with empty config)
2. 6 files with fcntl.flock(LOCK_UN) in finally blocks without
try/except: cron/scheduler.py, hermes_cli/auth.py,
agent/shell_hooks.py, tools/skill_usage.py,
tools/environments/file_sync.py, tools/memory_tool.py. If unlock
raises OSError, fd.close() is skipped and the lock is held forever.
The msvcrt branches already had try/except; the fcntl branches did
not. Fix by wrapping in try/except (OSError, IOError): pass.
3. agent/copilot_acp_client.py line 639: TOCTOU race — path.exists()
followed by path.read_text() with no try/except. If file is deleted
between the check and the read, FileNotFoundError propagates. Fix
by using try/except FileNotFoundError.
4. gateway/sticker_cache.py: non-atomic write via Path.write_text()
can leave truncated JSON on crash, causing JSONDecodeError on next
load. Fix by writing to tempfile + fsync + os.replace (atomic).
Closes the last Python-on-Windows UTF-8 exposure by making every
text-mode open() call explicit about its encoding.
Before: on Windows, bare open(path, 'r') defaults to the system
locale encoding (cp1252 on US-locale installs). That means reading
any config/yaml/markdown/json file with non-ASCII content either
crashes with UnicodeDecodeError or silently mis-decodes bytes.
After: all 89 affected call sites in production code now pass
encoding='utf-8' explicitly. Works identically on every platform
and every locale, no surprise behavior.
Mechanical sweep via:
ruff check --preview --extend-select PLW1514 --unsafe-fixes --fix --exclude 'tests,venv,.venv,node_modules,website,optional-skills, skills,tinker-atropos,plugins' .
All 89 fixes have the same shape: open(x) or open(x, mode) became
open(x, encoding='utf-8') or open(x, mode, encoding='utf-8'). Nothing
else changed. Every modified file still parses and the Windows/sandbox
test suite is still green (85 passed, 14 skipped, 0 failed across
tests/tools/test_code_execution_windows_env.py +
tests/tools/test_code_execution_modes.py + tests/tools/test_env_passthrough.py +
tests/test_hermes_bootstrap.py).
Scope notes:
- tests/ excluded: test fixtures can use locale encoding intentionally
(exercising edge cases). If we want to tighten tests later that's
a separate PR.
- plugins/ excluded: plugin-specific conventions may differ; plugin
authors own their code.
- optional-skills/ and skills/ excluded: skill scripts are user-authored
and we don't want to mass-edit them.
- website/ and tinker-atropos/ excluded: vendored / generated content.
46 files touched, 89 +/- lines (symmetric replacement). No behavior
change on POSIX or on Windows when the file is ASCII; bug fix on
Windows when the file contains non-ASCII.
Follow-ups on top of kshitijk4poor's cherry-picked salvage of PR #8018:
tools/environments/daytona.py
- PID-suffix /tmp/.hermes_sync.<pid>.tar so concurrent sync_back calls
against the same sandbox don't collide on the remote temp path
- Move sync_back() inside the cleanup lock and after the _sandbox-None
guard, with its own try/except. Previously a no-op cleanup (sandbox
already cleared) still fired sync_back → 3-attempt retry storm against
a nil sandbox (~6s of sleep). Now short-circuits cleanly.
tools/environments/file_sync.py
- Add _SYNC_BACK_MAX_BYTES (2 GiB) defensive cap: refuse to extract a
tar larger than the limit. Protects against runaway sandboxes
producing arbitrary-size archives.
- Add 'nothing previously pushed' guard at the top of sync_back(). If
_pushed_hashes and _synced_files are both empty, the FileSyncManager
was never initialized from the host side — there is nothing coherent
to sync back. Skips the retry/backoff machinery on uninitialized
managers and eliminates test-suite slowdown from pre-existing cleanup
tests that don't mock the sync layer.
tests/tools/test_file_sync_back.py
- Update _make_manager helper to seed a _pushed_hashes entry by default
so sync_back() exercises its real path. A seed_pushed_state=False
opt-out is available for noop-path tests.
- Add TestSyncBackSizeCap with positive and negative coverage of the
new cap.
tests/tools/test_sync_back_backends.py
- Update Daytona bulk download test to assert the PID-suffixed path
pattern instead of the fixed /tmp/.hermes_sync.tar.
Salvage of PR #8018 by @alt-glitch onto current main.
On sandbox teardown, FileSyncManager now downloads the remote .hermes/
directory, diffs against SHA-256 hashes of what was originally pushed,
and applies only changed files back to the host.
Core (tools/environments/file_sync.py):
- sync_back(): orchestrates download -> unpack -> diff -> apply with:
- Retry with exponential backoff (3 attempts, 2s/4s/8s)
- SIGINT trap + defer (prevents partial writes on Ctrl-C)
- fcntl.flock serialization (concurrent gateway sandboxes)
- Last-write-wins conflict resolution with warning
- New remote files pulled back via _infer_host_path prefix matching
Backends:
- SSH: _ssh_bulk_download — tar cf - piped over SSH
- Modal: _modal_bulk_download — exec tar cf - -> proc.stdout.read
- Daytona: _daytona_bulk_download — exec tar cf -> SDK download_file
- All three call sync_back() at the top of cleanup()
Fixes applied during salvage (vs original PR #8018):
| # | Issue | Fix |
|---|-------|-----|
| C1 | import fcntl unconditional — crashes Windows | try/except with fallback; _sync_back_locked skips locking when fcntl=None |
| W1 | assert for runtime guard (stripped by -O) | Replaced with proper if/raise RuntimeError |
| W2 | O(n*m) from _get_files_fn() called per file | Cache mapping once at start of _sync_back_impl, pass to resolve/infer |
| W3 | Dead BulkDownloadFn imports in 3 backends | Removed unused imports |
| W4 | Modal hardcodes root/.hermes, no explanation | Added docstring comment explaining Modal always runs as root |
| S1 | SHA-256 computed for new files where pushed_hash=None | Skip hashing when pushed_hash is None (comparison always False) |
| S2 | Daytona /tmp/.hermes_sync.tar never cleaned up | Added rm -f after download (best-effort) |
Tests: 49 passing (17 new: _infer_host_path edge cases, SIGINT
main/worker thread, Windows fcntl=None fallback, Daytona tar cleanup).
Based on #8018 by @alt-glitch.
* perf(ssh,modal): bulk file sync via tar pipe and tar/base64 archive
SSH: symlink-staging + tar -ch piped over SSH in a single TCP stream.
Eliminates per-file scp round-trips. Handles timeout (kills both
processes), SSH Popen failure (kills tar), and tar create failure.
Modal: in-memory gzipped tar archive, base64-encoded, decoded+extracted
in one exec call. Checks exit code and raises on failure.
Both backends use shared helpers extracted into file_sync.py:
- quoted_mkdir_command() — mirrors existing quoted_rm_command()
- unique_parent_dirs() — deduplicates parent dirs from file pairs
Migrates _ensure_remote_dirs to use the new helpers.
28 new tests (21 SSH + 7 Modal), all passing.
Closes#7465Closes#7467
* fix(modal): pipe stdin to avoid ARG_MAX, clean up review findings
- Modal bulk upload: stream base64 payload through proc.stdin in 1MB
chunks instead of embedding in command string (Modal SDK enforces
64KB ARG_MAX_BYTES — typical payloads are ~4.3MB)
- Modal single-file upload: same stdin fix, add exit code checking
- Remove what-narrating comments in ssh.py and modal.py (keep WHY
comments: symlink staging rationale, SIGPIPE, deadlock avoidance)
- Remove unnecessary `sandbox = self._sandbox` alias in modal bulk
- Daytona: use shared helpers (unique_parent_dirs, quoted_mkdir_command)
instead of inlined duplicates
---------
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
FileSyncManager now accepts an optional bulk_upload_fn callback.
When provided, all changed files are uploaded in one call instead
of iterating one-by-one with individual HTTP POSTs.
DaytonaEnvironment wires this to sandbox.fs.upload_files() which
batches everything into a single multipart POST — ~580 files goes
from ~5 min to <2s on init.
Parent directories are pre-created in one mkdir -p call.
Fixes#7362 (item 1).
Replace per-backend ad-hoc file sync with a shared FileSyncManager
that handles mtime-based change detection, remote deletion of
locally-removed files, and transactional state updates.
- New FileSyncManager class (tools/environments/file_sync.py)
with callbacks for upload/delete, rate limiting, and rollback
- Shared iter_sync_files() eliminates 3 duplicate implementations
- SSH: replace unconditional rsync with scp + mtime skip
- Modal/Daytona: replace inline _synced_files dict with manager
- All 3 backends now sync credentials + skills + cache uniformly
- Remote deletion: files removed locally are cleaned from remote
- HERMES_FORCE_FILE_SYNC=1 env var for debugging
- Base class _before_execute() simplified to empty hook
- 12 unit tests covering mtime skip, deletion, rollback, rate limiting
liuzikaii