Fourth independent review. Two more consent leaks, both reproduced through
the real relay entry point before and after the fix. Both are failures of
my own round-3 fix, which recorded revocation in the wrong place.
BLOCKER 1 - revoking while idle recorded nothing. _record_revocation lived
inside send_pending's loop, but _send_exported_packages returns early when
send is false, before a sender is ever constructed. The dominant case is a
user turning sending off while no pass is running, so the loop that was
meant to observe the revocation could never run. Reproduced: 6 periods
collected during a refused window were transmitted on re-enable.
The window now closes on the observed config EDGE, before the early return.
Last-seen send state is persisted because each hook fires in a fresh
process, so a true->false transition is only visible by comparison. The
rising edge also opens the window explicitly: the sender only runs when
there is something to send, so a user who opts in and out before any
package exists would otherwise have no window for record_revoked to close.
BLOCKER 2 - turning COLLECTION off never recorded revocation. The
not-enabled branch in setup.py force-set send=false and returned without
calling _record_send_consent_change, so `hermes tools` -> disable shared
metrics silently dropped consent while leaving the window open. Same
retroactive release on re-enable. Both consent surfaces now record, and
setup keeps the relay's edge detector in step.
Also, from the same review's mutation sweep:
- the scheme check is now pinned as an allowlist. Replacing the http test
with `if True` survived the entire suite, because every non-http case
targeted a REMOTE host where the loopback branch rejects anyway. Only a
non-http scheme on loopback distinguishes the two. Shipped behaviour was
already correct; nothing guarded it.
- A.3 no longer claims rotation bounds long-term linkability outright.
Measured against 11 real packages: resource is a stable low-entropy
tuple and periods are contiguous across a rotation, so for a RARE
configuration those can bridge windows. The honest claim is that
rotation raises the cost, not that it makes correlation impossible.
Two mutants are documented as unkillable rather than papered over with
tests that only appear to cover them: the _defer clamp is unreachable from
any current caller, and widening the falling-edge check to an
unconditional else is behaviourally equivalent because record_revoked is
idempotent and no-ops without an open window.
An earlier version of the anti-spurious-revocation test could not fail
either - it used a never-consented store, where record_revoked no-ops
regardless. Rewritten to opt in, revoke, re-enable, and then assert that a
steady enabled state does not re-close the reopened window.
259 tests pass. Staging E2E re-run: both packages 202.
Third independent review. Both blockers reproduced against a real store
before and after the fix.
BLOCKER 1 — head-of-line starvation. The claim query is LIMIT 1, and a
package already handled this pass was rejected AFTER the fetch, so
_claim_next returned None and send_pending read that as 'queue empty'.
Any row that sorts first and becomes eligible again mid-pass therefore
terminated the pass. This is reachable normally: a 429 with a short
Retry-After, or a pass outliving the 15-minute failure backoff (a legal
pass runs ~1900s). Measured: 10 of 19 healthy packages silently dropped.
The seen-set is now excluded IN SQL, so None genuinely means no eligible work.
Same scenario now delivers 19 of 19.
BLOCKER 2 — revoking consent leaked once it was re-granted. opt_in_period
was write-once, so packages collected while the user had send: false
still had period_start >= the ORIGINAL opt-in day; re-enabling released
the whole refused window. Reproduced: 5 packages from a 5-day opted-out
window transmitted on re-enable. Turning sending off now closes the
consent window, and the next enabled pass opens a new one from that day.
Recorded both in the setup wizard and in the sender itself, because
config.yaml can be hand-edited where the wizard never sees it.
Also: a send_attempts ceiling (a poisoned head row burned ~160 requests
over 30 days, unbounded), _defer clamps to >= 1s so it cannot write a
past deadline, and the dead skipped_not_due field is removed.
Test-quality fixes, since vacuous tests have been the recurring problem:
- the lease test asserted only 'in the future', passing for a 1s lease;
it now requires the lease to outlast one package's worst legal case
- test_shutdown_joins_the_send_thread grepped getsource for a method
name — a change-detector AGENTS.md rejects — and is now behavioural
- gzip determinism was unguarded: both retries in one pass compress in
the same second, so removing mtime=0 was caught by nothing. Now
compares output across a real second boundary.
All five new regressions are mutation-verified: reintroducing each bug
fails its test. The first attempt-ceiling test SURVIVED its mutation
(the seeded row was excluded by another predicate) and was rewritten to
drive the real loop.
251 tests pass. Staging E2E re-run: both packages 202.
Second independent review found the lease fix incomplete. Reproduced
each finding before fixing.
BLOCKER — the batch lease expired mid-pass. _claim took up to 20 rows
under ONE shared lease, but a single package can legally consume ~96s
(three 30s timeouts plus 1s+5s backoff), so a full batch runs ~1900s
against a 180s lease. Later rows' leases expired while this pass still
held them, and another process re-sent them. Reproduced: 192s elapsed,
pkg-2 POSTed twice.
Packages are now claimed ONE AT A TIME, immediately before being sent,
so a lease only has to cover the package actually in flight. Verified:
same scenario now sends each package exactly once.
HIGH — revoking consent did not stop a running pass. The runtime read
send consent once before starting the thread, so a pass could keep
transmitting for minutes after a user set send: false, contradicting
the documented promise that it 'stops transmission immediately'.
Consent is now re-read before every package and fails CLOSED if it
cannot be established.
MEDIUM — all non-429 4xx were treated as permanent, discarding data.
403 is the ingest service's own origin guard: a Transform Rule or edge
misconfiguration would have permanently dropped every package sent
during the incident. Only 400 (malformed envelope) and 413 (over the
1 MiB cap) are terminal now; everything else retries.
MEDIUM — valid JSON that is not an object blocked the whole queue.
json.loads('["a"]') succeeds, then .get() raised AttributeError inside
the claim transaction, rolling it back and starving every healthy
package behind it. Payload shape and install_id are now validated, and
an unusable row is rejected individually.
LOW — the clock-rollback comment and test name claimed the opposite of
the code. The behaviour is right (a future issued_at means the recorded
age is untrustworthy, so reissue); the wording is now honest about it.
LOW — removed the stale HERMES_TELEMETRY_ENDPOINT reference left in
config_defaults after the override was deleted.
247 tests pass (was 234). Staging E2E re-run: both packages 202.
The Windows footgun checker caught bare Path.read_text()/write_text()
in the config I/O I added in the previous commit. Without encoding=,
Python uses locale.getpreferredencoding() — cp1252/cp936 on Windows —
so a UTF-8 config crashes or writes mojibake.
This was the single root cause of both red checks: the blocking lint
job and tests/scripts/test_windows_footguns_full_repo_scan.py, which
runs the same checker over the repo. Everything else was green
(38,447 passed, 1 failed).
Verified locally: the checker now reports no footguns across 1019
files, and the full-repo-scan test passes.
Independent review found the claim mechanism did not work. Reproduced
against the real store: two senders POSTed the same package.
The claim wrote next_attempt_at = now, but selection requires
next_attempt_at <= now, so a concurrent pass matched the same row
immediately. It now writes a LEASE INTO THE FUTURE
(_CLAIM_LEASE_SECONDS), which is what actually excludes another pass,
and expires by itself if a process dies mid-send. _mark is additionally
guarded on send_state so a straggler whose lease lapsed cannot
overwrite a completed send back to pending.
The old concurrency test could not fail: it raised AssertionError from
inside a transport, and _send_one catches every exception as a
retryable transport error. It now records what the second pass saw.
Also from review:
- shutdown() never joined the send thread; the join was only wired into
deactivate(). A short-lived CLI therefore killed an in-flight send at
exit, on the only cadence this feature has.
- Removed HERMES_TELEMETRY_ENDPOINT. AGENTS.md reserves HERMES_* for
secrets, and a behavioural override here was a consent hazard: an
inherited variable could silently redirect telemetry a user agreed to
send to Nous. The staging E2E writes the endpoint into its throwaway
profile instead, which also exercises the real config path.
- Added the shared-metrics toggle that AGENTS.md requires
as the third opt-in surface, delegating to the setup prompt so the
consent rules stay in one place.
- Non-429 4xx (401/403/404/413/422) are now permanent. Only 400 was,
so a wrong path or oversized body retried every 15 minutes for 30
days until retention pruned it.
- The opt-in day is stamped when the user consents, not on the first
send pass, which silently dropped the opt-in day whenever the next
export crossed midnight UTC.
- gzip now uses mtime=0. The embedded timestamp made two sends of one
package differ on the wire, so the 'byte-identical retry' E2E was
comparing parsed bodies and could not have caught it. It now compares
raw request bytes.
- Reconciled the three stale claims in relay-shared-metrics.md that
said no remote-delivery path exists.
233 tests pass (was 213). Staging E2E re-run through the config path:
both packages 202, and the service logged both objects written to S3.
Sends real packages through the real sender to the real staging ingest
service and reports what came back. Uses a throwaway HERMES_HOME so an
operator's own telemetry state is never touched, and asserts the local
install_id did not cross the wire.
Kept as a script rather than a pytest case on purpose: it needs live
network and a deployed staging service, so it must not run in CI.
Step 6 of the shared-metrics exporter, plus a loopback E2E.
_export now triggers an opt-in send pass on a daemon thread. The hook
runs on finish_task — the user's interactive path — so a 30s network
timeout there would be felt directly; the thread keeps that latency off
the caller. A test asserts _export returns in under a second while a
send is deliberately blocked.
At most one pass is in flight per process: a queued second pass would
add nothing, because the next hook fire picks up whatever is still
pending. Shutdown joins the thread for at most two seconds, then lets
it go — the packages remain in SQLite and go out on the next run, so
blocking a user's exit on a slow network is the wrong trade.
Sending is resolved per pass from the profile's own config, so turning
it off takes effect at the next hook fire without a restart.
E2E (tests/hermes_cli/test_shared_metrics_sender_e2e.py): the real
sender against a real HTTPServer on loopback — actual urllib, gzip,
headers and sockets rather than an injected fake. Covers delivery and
sent-state, 400/429/5xx handling, a retry sending byte-identical
bytes, gzip shrinking a realistic 120-metric package and the server
parsing it back, install_id never crossing the wire, the outbox file
staying untouched, and a dead server deferring without raising.
Wiring tests: 12, all negative-space properties — no send without
opt-in, no blocking, no pile-up, no crash propagation.
Steps 4, 5 and 7 of the shared-metrics exporter: the send logic, the
consent gate, and backoff plus multi-process claiming. These arrive
together because the sender is not correct without all three.
Contract handling: 202 marks sent; 400 is permanent and never retried;
429 honours Retry-After (clamped to a day so a bogus value cannot park a
package); 5xx, timeouts and transport errors retry three times in-process
with 1s/5s/25s full-jitter backoff, then defer to a later pass.
Consent is gated on the package's PERIOD, not its creation time. A period
is split across packages created on different days, so a created-at gate
would send a period's tail while dropping its head and silently
undercount the opt-in day — data that looks complete and is wrong. The
opt-in day is recorded once and never moves, so toggling sending off and
on does not re-open the pre-consent backlog.
Rows are claimed in a write transaction, which is what stops two Hermes
processes sharing one database from sending the same package twice.
next_attempt_at persists backoff across restarts, so a hard-down service
is not retried on every task completion.
The body is recomputed from payload_json rather than stored a second
time: json.dumps is deterministic here (verified against the real outbox
— 11 of 11 files reproduce byte-for-byte), and the only mutable input,
the derived identity, is frozen on the row at first attempt. That keeps
retries byte-identical across a salt rotation for ~36 bytes instead of a
duplicate ~11 KB payload.
The outbox directory is never written to or deleted from. A 202 updates
SQLite only, because those files are the user's 30-day local history and
retention already owns their lifecycle.
Tests: 33. Two of them caught real defects in this commit — an
unreadable row aborted the claim transaction and blocked every package
behind it, and the compression assertions were passing through an
injected fake that bypassed the code under test.
Step 3 of the shared-metrics exporter.
The shared-metrics doc commits that a remote exporter 'must not reuse
the persistent local identifier by default'. install_id is therefore
never transmitted: each package carries
HMAC-SHA256(local-only rotation salt, install_id) instead.
Within a 30-day rotation window the value is stable, so distinct
installs remain countable — the first question the data has to answer.
Across windows it changes, bounding long-term linkability. The
derivation is one-way, so the service cannot recover install_id.
The salt lives in telemetry_state next to install_id, so removing the
shared-metrics directory resets both together and the documented reset
behaviour keeps working with no second cleanup path.
Rotation is deliberately not a bare 'age > interval' check: a clock
that jumps backwards must not read as an expired salt, and an
unparseable issued-at reissues instead of raising.
substitute_install_id replaces exactly one field and copies rather than
mutating, so payload schema evolution stays a sender-side concern.
Tests: 19, including that install_id never survives substitution, that
no other field changes, and — the property that keeps retries
contract-compliant — that a package rebuilt from a FROZEN derived id is
byte-stable across a salt rotation while a fresh derivation is not.
Step 1+2 of the shared-metrics exporter.
Config: telemetry.shared_metrics.send (default false) and .endpoint
(default production), resolved by a new shared_metrics_send_config
module. Precedence is HERMES_TELEMETRY_ENDPOINT > config > default; the
env var exists so the live staging E2E never has to mutate a user's
config. send requires enabled and never implies it — that combination
is a misconfiguration the user believes is working, so it logs an ERROR
once per process rather than silently doing nothing. Plaintext
endpoints are refused unless the host is loopback, so a typo cannot
send telemetry in clear text.
Per AGENTS.md, outbound telemetry needs a user-facing opt-in, so
setup_telemetry now prompts for sending as a second, separate question
and force-disables send when collection is turned off.
Storage: six additive nullable columns on package_outbox for send
bookkeeping. The store schema version deliberately does NOT move —
_ensure_schema_in_transaction raises on any version it does not
recognise and has no forward-compatibility branch, so bumping it would
hard-fail an older Hermes, a second profile on an older build, or a
rollback, against the same file. Old readers select named columns and
never SELECT *, so the additions are invisible to them.
Also corrects the two places that promised telemetry is never uploaded
(config_defaults comment and cli-config.yaml.example); leaving them
would make them false privacy statements once sending ships.
Tests: 26 covering config precedence, the enabled/send relationship,
transport safety, fresh-database creation, upgrade from a pre-send
database (rows preserved, version pinned, idempotent), and that the
shipped export query still runs. Mutation-checked: bumping the schema
version fails 5 of them.
The shared-metrics doc states that a future remote exporter 'must not
reuse the persistent local identifier by default' and 'requires a
separate product and privacy decision covering consent, identity scope,
rotation or keyed pseudonymization, reset behavior, retention, and
deletion'.
That exporter is now being built. Appendix A answers each of those six
items before any code lands, so the reasoning is reviewable on its own
and survives the implementation:
- consent is a separate opt-in from collection, gated on the PERIOD a
package covers rather than when it was created (a period is split
across packages made on different days, so a created_at gate would
send a period's tail while dropping its head and silently
undercount the first day)
- the transmitted identifier is HMAC-SHA256(local-only salt,
install_id), never install_id itself
- the salt rotates every 30 days
- reset gives a new remote identity but cannot unsend
- local retention is unchanged; send state does not extend it
- there is no self-service remote deletion, and the user -> derived-id
lookup that would enable one is deliberately not built
A.7 additionally records what the outbox directory IS (the user's local
history, not a send queue) because misreading it would have led to
deleting user data on acknowledgement.
Follow-ups on the #85416 salvage:
- _store_bin_names()/_sibling_names() derive the versioned interpreter name
from the RUNNING interpreter instead of a hardcoded 3.11-3.13 list, with a
sorted python3.* glob fallback for stores/aliases built by a different
Python minor (major bumps, fixtures) — no future version bump can silently
leave an alias resolving back into the versioned uv store.
- _repoint_alias_symlinks unions expected alias names with the versioned
symlinks actually on disk before repointing.
The sidebar row's Tip trigger test derives its fixture from the wall clock:
const startedAt = Math.floor(Date.now() / 1000) - 5 * 60
...
expect(age.getAttribute('aria-label')).toMatch(/^5m, Today at /)
"Five minutes ago" is only today when the run does not straddle local
midnight. Between 00:00 and 00:05 the timestamp falls into the previous
day, formatMessageTimestamp correctly returns the yesterday label, and
the test fails on a day boundary it was never written to exercise:
AssertionError: expected '5m, Yesterday at 11:56 PM'
to match /^5m, Today at /
This is a real CI failure, not a theoretical one - it took down a
check:test:ui shard on an unrelated desktop PR at 00:01 UTC, and it will
do so for any PR whose shard happens to land in that five-minute window.
Pin the clock to local noon before deriving the timestamp so the fixture
can never cross a day boundary. Only Date is faked (toFake: ['Date']),
so the component's own timers - the running arc and the tooltip open
delay - keep running for real; the neighbouring tooltip tests that
advance timers are unaffected. The describe block gains the
useRealTimers teardown its sibling already had.
The production formatter is not changed: rendering "Yesterday at 11:56
PM" for a session started five minutes before midnight is correct, and
the assertion is about the label's composition, not about which day it
names.
The #87196/#87720 conflict resolution kept the bounded-drain helper and
its constant; the windows_only kill-tree test still asserted the dropped
_CUA_INSTALLER_REAP_TIMEOUT name. Same 2-communicate contract, surviving
constant.
Re-enables the routine confirmed-upgrade path on Windows that #95008
deferred wholesale, now that every unattended-hostile surface is closed:
- stdin=DEVNULL (salvaged #79871): upstream's Read-Host consent prompt
can't block a hidden console.
- Bounded post-kill drain (salvaged #87720): a kill-surviving descendant
holding the stdout pipe can't strand the update past its ceiling.
- 120s background ceiling (salvaged #87196): safe now that a legitimate
600s lock wait can't occur on this path.
- NEW lock preflight: upstream's install lock held by a live process ->
skip in ~0s instead of eating its 600s stale-lock window (the actual
11-minute hang observed 2026-08-25; UAC was a red herring — base
install is no-admin by upstream design).
- NEW 5s network preflight: github.com unreachable -> skip immediately.
- Windows unattended runs pass -NoAutoStart, skipping the ONLY
install.ps1 branch that self-elevates (autostart task re-registration).
- Timeout diagnosability: partial installer output is logged on kill so
the next hang names its stage instead of dying silently.
Contract repairs and fresh installs stay interactive-only (SmartScreen /
first-time elevation legitimately need a human).
On Windows, `hermes update` can hang past its own 660s cua-driver timeout
until the user kills an orphaned PowerShell by hand. The timeout ceiling is
not the problem; the code that runs after it is.
`_run_cua_driver_installer` handles `TimeoutExpired` by killing the process
tree and then draining the pipes with a bare `proc.communicate()`. The kill
is best-effort by construction: every `psutil.Error` in `_kill_installer_tree`
is logged at debug level and stepped over, on the reasoning that a partly
killed tree beats none. That is the right call, but it means the drain has to
survive a partial kill, and an unbounded drain does not.
The concrete case is the one reported. `install.ps1` self-elevates through
`Start-Process -Verb RunAs`, so the descendant runs at High integrity and a
medium-integrity `child.kill()` raises `AccessDenied`. The per-child handler
logs it and continues. That survivor is still holding the `stdout=PIPE` write
handle it inherited, so the following `communicate()` waits for an EOF that
arrives only when somebody kills that process manually. A bounded 660s wait
becomes an unbounded one, after the warning has already printed.
Bound the drain instead. A kill that landed closes the pipe immediately, so
this costs nothing on the normal path; a kill that did not costs 15s rather
than forever. The original `TimeoutExpired` is re-raised either way, so the
existing manual re-run hint still prints and the update unwinds. Losing the
tail of a timed-out installer's log is the cheaper half of that trade, and it
is only lost in the case where the run already failed.
The drain deliberately does not close the pipe handles. `communicate()`'s
reader threads are still blocked on them and closing underneath them races;
they are daemon threads, so abandoning them does not hold the interpreter
open.
Both timeout handlers (streaming and captured) now go through one helper.
The streaming child inherits the console rather than a pipe, so it is much
harder to stall there, but the two branches should not drift on a rule this
small.
Tests: 5, in a new `TestInstallerTimeoutDrainIsBounded`. Two fail without the
fix, including the reported scenario end to end (a child kill refused with
`psutil.AccessDenied`, asserting the drain still carries a deadline). The
deadline is asserted as a kwarg rather than by timing, because a test that
proved the hang by hanging would be the same defect wearing a test's name.
Scope note: this does not touch the `stdin` inheritance that lets
`install.ps1`'s `Read-Host` block in the first place. That is #79684 and open
PR #79871 already carries the one-line `stdin=DEVNULL` fix; the two are
independent and neither subsumes the other, since `DEVNULL` cannot unblock a
UAC elevation dialog.
Fixes#87703
When `hermes update` runs the cua-driver installer non-interactively,
stdout is captured (PIPE) but stdin is inherited from the parent process.
The upstream install.ps1 prompts `[Y/n]` when it detects a stale
cua-driver daemon, but the prompt goes to captured stdout (invisible)
while stdin waits for input — causing an 11-minute hang until the
watchdog timeout.
Fix: redirect stdin to subprocess.DEVNULL on the non-verbose path so the
installer reads EOF immediately instead of blocking. The installer exits
quickly with a non-zero code, and the existing handler shows the manual
re-run hint with the installer's captured output.
Fixes#79684
profiles.list opened every profile state.db as a writable SessionDB,
which waits out write-lock patience while that profile's backend is
mid-turn. The desktop RPC timed out and Bot Mode's infinite React
Query retry kept the sidebar on a spinner.
Inspect those DBs read-only and bound roster retries so names still
paint.
Two follow-ups on top of the #86391 salvage:
- check_macos_tcc_grants: a certificate-anchored DR (hermes desktop
--setup-tcc-identity, or a notarized release) now reports as stable in its
own class instead of falling into the identifier-pinned message; the
identifier-pinned message points at --setup-tcc-identity for the strongest
anchor.
- collect_relay_plugin_cutover_findings: only merge process-level env vars
when env_map is None (run_doctor's live path). An explicit env_map is a
complete environment description — merging os.environ on top made
report_deprecated_config_and_env non-hermetic on boxes exporting legacy
relay vars (10 findings vs the expected 2 in
test_report_does_not_count_as_blocking_issue).
Review feedback (AI review on #86391):
- guard _macos_desktop_dr subprocess.run against TimeoutExpired/FileNotFoundError
so a hanging codesign degrades to the unreadable-DR warning, never crashing
the doctor run (matches the file's existing subprocess guard pattern)
- select the desktop bundle by newest-mtime across release/mac-*/Hermes.app,
matching _desktop_packaged_executable, instead of a fixed arch order
- note the cdhash-match proxy assumption at the classification site
- document why /Applications/Hermes.app (Hermes-Setup launcher,
com.nousresearch.hermes.setup, certificate-anchored) is deliberately not probed
- extend the repair hint to cover per-service resets
- regression tests: codesign timeout and missing-codesign paths
GPT-OSS review: an empty codesign output would fall through to the
'stable identity' branch and false-positive. Guard with and
cover the empty-string case. Flash review: the non-macOS silence test
mocked the bundle to None, so it never exercised the platform guard;
mock a real path instead.
TCC keys permission grants to the app's code-signing requirement. Grants
made to pre-#73681 builds carry a cdhash-pinned requirement that no
longer matches the rebuilt bundle, so macOS re-prompts on every capture
even though the System Settings toggle shows ON — and the modern prompt
has no Allow button, so users cannot complete the one-time re-grant.
- hermes doctor: new check_macos_tcc_grants() reports the desktop
bundle's DR class (cdhash-pinned → grants reset on every update;
identifier-pinned → stable) and prints the exact stale-grant repair
(tccutil reset, toggle ON, fully quit & relaunch).
- hermes update: after a successful update on macOS with a desktop app
installed, print the one-line stale-grant guidance.
- docs: desktop.md no longer claims grants persist 'out of the box';
documents the one-time re-grant for pre-fix grants.
Closes#86385
The heal decision is extracted into should_heal_self_marker_refusal()
so the contract is testable: heal ONLY on exit 2 + a marker naming this
process. Five tests pin it — self-owned heals, foreign owner (real live
sibling process) never heals, missing/garbage marker never heals,
non-exit-2 never heals, and the full acquire -> refuse -> drop-claim ->
retry-precondition lifecycle with a real UpdateMarkerGuard.
windows-rust-e2e.yml mirrors the wine2e pattern: fires only on
wine2e-rust/** pushes, runs the crate's cargo test --lib on
windows-latest (the shipping platform). The permanent Linux lane stays
authoritative for the unix-gated pipe-drain fixtures.
Main's live_marker_owner has adopted self-owned markers since
160586ff8/dbc2a9c8e (#74761), so the cherry-picked comment's claim that
it 'maps self-ownership to None' is stale. The raw read is still the
right tool — the heal needs the single fact 'does the marker name our
PID' without age/liveness policy folded in.
An updater binary spawns 'hermes update' while holding the update marker
with its own PID. A checkout that predates the HERMES_UPDATE_HANDOFF_PID
env fix (8c76fe19f) and the ancestor-pid fallback runs its pre-pull
update_lock.py, reads that marker as a live foreign update, and exits 2
— and the updater deliberately skips its retry for exit 2, so the
refusal loops forever: the update being refused is the one that ships
the fix, and the failure screen's Retry re-enters the same state.
Detect the case with a raw marker read (live_marker_owner deliberately
maps self-ownership to None, so it cannot answer this), drop our own
claim, and retry the child once with the marker absent. The guard
re-removes on Drop (idempotent) and the desktop is already gone at this
point, so nothing races the brief marker-free window.
Fixes#75788
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Background processes started by subagents (task_id sa-*) route their
notify_on_complete / watch_pattern notifications to the parent
conversation (b95ec1cb5) because anything outliving the child needs a
durable consumer. In practice these 'npm ci finished' walls are noise
mid-conversation — the child's consolidated delegation result is the
deliverable.
- New config key delegation.surface_child_process_notifications
(default false = suppress). Flag true restores the previous behavior
exactly (delivery with subagent attribution line).
- drain_notifications drops (never requeues) completion/watch_match/
watch_disabled events whose task_id starts with 'sa-' when the flag
is false, logging at debug with session_id+task_id for diagnosis.
Requeueing would pin them forever — children never drain notifies.
- async_delegation events are NEVER suppressed (they ARE the result).
- watch_disabled emitters now carry task_id so sa- sessions' safety
events follow the same suppression as their other events.
- Config read errors fall back to the default (suppress) and never
crash the drain loop.
- Docs: delegation.md + configuration.md.
Follow-up to the salvaged #94296: the two guards covered the repair and
confirmed-update branches, but when cua-driver is enabled yet not
installed at all, control still reached _run_cua_driver_installer() and
an automatic 'hermes update' would launch the interactive install.ps1
anyway. Add the same defer before the installer run, keep POSIX
behavior unchanged, and give the confirmed-update message a natural
fallback when latest_version is unknown.
Two interaction seams between the #92693 salvage (merged as #95050) and
this branch: the source-label indexing test now compares in token space
(the stemmer shortens 'catalogsource' to 'catalogsourc'), and the
unregistered-core-name describe test forces the unregistered condition
via monkeypatch instead of depending on which sibling test file imported
model_tools first.
The parallel determinism test warms _stem's lru_cache after ~11 distinct
stems, so almost no iterations reach the underlying stemmer and a shared
(non-thread-local) instance survives it. New test bypasses the cache with
per-iteration unique tokens via _stem.__wrapped__, so thousands of stems
run concurrently: a shared stemmer's mutable parse state fails it within
2,000 calls (verified — the mutant dies 8/8 runs; healthy runs stay green).
tool_search now takes queries: string[] (searched independently against
the same catalog, limit applies per query, default 5 / max 25) and
returns the split shape: per-query groups carry tool names only, one
shared tools map holds each matched tool's source, description (400-char
cap) and required parameter names once. When some queries miss, a single
top-level available_sources + hint block replaces the old per-response
fallback.
tool_describe now takes names: string[] and returns a map keyed by name;
unknown names collect in not_found (with the refresh hint) and
non-deferrable names keep their per-name spelling-check error in errors,
so one bad name no longer fails the whole call. Duplicates dedupe
silently.
The shared tokenizer now applies Snowball stemming (english, exact-pinned
snowballstemmer) at both index and query time, closing the measured
plural/singular miss where 'issues' failed to return create_issue. The
inline BM25 is unchanged. Stemmer instances are thread-local (they carry
mutable parse state and bridge dispatch can run on parallel tool-call
threads).
New config knobs under tools.tool_search: max_queries / max_describe_names
(default 10 each, floor 1, no upper clamp) bound the per-call array
inputs; over-cap calls error so the model repairs in one round-trip.
No backward compatibility with the single query/name shapes, by decision.
scripts/analyze_livetest.py renders both shapes since transcripts on disk
may predate this change.
RoutinesPane resolved its cron owner from a bare $lastRoster.get()
snapshot. BotsHomeView owns the roster fetch, so whenever the pane
mounted before that fetch landed (fresh boot ordering, renderer reload
resetting the atoms) it captured an empty roster forever: the pane
stayed pinned on "Cronjobs are unavailable until this agent appears in
the roster." and Create Cronjob silently no-oped until some unrelated
atom happened to re-render it (#94483).
Subscribe via useValue($lastRoster) instead, matching every other
consumer of the shared roster. Scoping intent is unchanged: a complete
focused owner without an exact roster row still fails closed rather
than routing cron reads/mutations through a stale selection or an
unscoped profile name (contracts in routines-selected-bot.test.mjs).
The source contract in focused-bot-highlight.test.mjs pinned the bare
.get() shape; it now pins the subscription form while keeping the
socket-home-atom prohibition that motivated it.
Fixes#94483
Ben Barclay